3. Carefully push the paper tray fully in.
• The Wide LCT can hold up to 1,000 sheets of paper in tray 3 and 5, and 2,000 sheets of paper in
tray 4.
• If you load paper that cannot be automatically detected, specify its size using the control panel. For
details, see p.80 "Changing to a Size That Is Not Automatically Detected".
• The Wide LCT is identified as tray 3, tray 4, and tray 5.
• Various sizes of paper can be loaded in the Wide LCT by adjusting the positions of side fences and
end fence. For details, see p.77 "Changing the Paper Size in the Wide Large Capacity Tray".
Fanning the Paper
• If you are loading coated paper in the Wide LCT, it is important that you fan the sheets thoroughly.
Misfeeds may occur if paper is not fanned thoroughly.
1. Loosen the stack by riffling the sheets.
To Next Page
Loading...
