Ricoh Pro C751 EX - Page 80

4. Loosen the screws holding the side fences in position.
CDL055
5. Load paper by aligning the paper with the left side of the paper tray.
Place paper with print side up.
Load a stack of paper about 5 10 mm (0.2 0.4 inches) high.
Make sure the paper rest on top of the supporting plates on both sides.
1
1
CDL079
1. Supporting plates
6. Take the grip of the side fences with your fingers, and adjust the side fences to the paper
size.
CDL056
7. Set the paper flush against the protrusions in the bottom of the inner side fence.
2. Adding Paper
78
2