Ricoh Pro C901S - Page 117

Required finished size Book block Cover
A5 B5 JIS B4 JIS
8
1
/
2
× 11 9 × 12
*1
13 × 19.2
*1
13 × 19
*1
5
1
/
2
× 8
1
/
2
7
1
/
4
× 10
1
/
2
10.5 × 14.5
*1
*1
Specify the paper size using [Custom Size] in Tray Paper Settings.
1. Press [Cut 3 Edges].
2. Press [Specify Finishing Size].
3. Select the finished size under [Regular Size].
4. To adjust the cut position, press [Cut Position Fine Adj.].
5. Press [ ] and [ ] to set the top or bottom cut position, and then press [OK].
To change the value you entered, press [ ] or [ ], or press [Clear], and then specify a new value.
6. Press [OK] twice.
• You can shift the cut position from -22.0 to 22.0 mm (-0.86 to 0.86 inch) in 0.1 mm (0.01 inch)
increments.
Finishing
115
2