Various Scan Settings
112
6
Note
❒ You can specify original sizes (X1 and Y1) of 140 mm or larger.
❒ To scan an original that is smaller than 140 mm, make settings as though
you were scanning a section of an original that is larger than 140 mm. For
example, to scan a CD label on the exposure glass, specify a size according
to the chart below. For details about scanning procedures, see “Setting pro-
cedure of custom size when scanning part of an original”.
Reference
p.113 “Setting procedure of custom size when scanning part of an original”
ARE005S
To Next Page
Loading...
