M154/M155/M174/M175/A0A7/M287/M0BB 1-4 SM Appendix
1.2 SUPPORTED PAPER SIZES
A Supported and the size is molded in the tray. Need to select paper size by
operation panel/driver.
B Supported but size is not molded in the tray. Need to select paper size by
operation panel/driver.
*For bypass tray, paper width is indicated.
C Need to input paper size by operation panel and driver.
N Not supported.
Type SEF/LEF Size Input Tray Type
Standard
Tray
Duplex
Plain
Paper
A4 SEF 210x297mm A B Y
LEF 297x210mm N N N
B5 SEF 182x257mm A B N
LEF 257x182mm N N N
A5 SEF 148x210mm A B N
LEF 210x148mm N C N
B6 SEF 128x182mm B B N
LEF 182x128mm N N N
A6 SEF 105x148mm B B N
LEF 148x105mm N N N
Plain
Paper
DLT SEF 11" x 17" N N N
Legal SEF 8 1/2”x14” A B Y
Letter SEF 8 1/2”x11” A B Y
LEF 11”x 8 1/2” N N N
Half Letter SEF 5 1/2” x 8 1/2” B B N
Executive SEF 7 1/4”x10 1/2” A B N
LEF 10 1/2”x7 1/4” N N N
Plain
Paper
F SEF 8” x 13” B N N
Foolscap SEF 8 1/2” x 13” B N N
Folio SEF 8 1/4” x 13” B N N
8 Kai SEF 267 x 390mm N N N
16 Kai SEF 195 x 267mm B B N
LEF 267 x 195mm N N N
To Next Page
Loading...
