Ricoh SP 5200S Initial Guide

5. Check that [Program / Change] is selected.
6. Press [New Program].
7. Press [Change] under “Name”.
8. Enter the name, and then press [OK].
If necessary, press [Change] under “Key Display”, and then enter the name of the key to which the
destination is assigned.
9. Press the key for the classification you want to use under “Select Title”.
10. Press [Folder].
11. Press [FTP].
12. Press [Change] under “Server Name”.
13. Enter the server name, and then press [OK].
14. Press [Change] under “Path”.
15. Enter the path, and then press [OK].
You can enter an absolute path, using this format: “\user\ home\username”; or a relative path,
using this format: “directory\sub-directory”.
If you leave the path blank, the login directory is assumed to be the current working directory.
16. To change the port number, press [Change] under “Port Number”.
17. Enter the port number using the number keys, and then press the [ ] key.
18. Press [Connection Test] to check that the path is set correctly.
1. Using the Scanner Function
20
1

Ricoh SP 5200S Specifications

General

Print Technology	Laser
Print Resolution	1200 x 600 dpi
Duplex Printing	Yes
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Scanner Type	Flatbed, ADF
Connectivity	USB 2.0, Ethernet
Network Connectivity	Ethernet
Print Speed	Up to 47 ppm