139
3
Taking Pictures
Taking Pictures Underwater
This camera complies with JIS waterproof grade 8 and can be used
to take pictures at a depth of 10 m continuously for 2 hours. In addition,
this camera complies with JIS dustproof grade 6 (IP68).
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select
(Underwater) or (Underwater Movie).
3
Press the 4 button.
The shooting mode is selected and the camera returns to capture mode.
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button fully.
If you selected , the picture is taken.
If you selected , recording starts. To stop recording, press
the shutter release button fully. Perform the same steps as C (Movie)
mode to record movies.
Taking Underwater Pictures (Underwater Mode/
Underwater Movie Mode)
Use the Underwater mode to take underwater still pictures that capture
the blueness of the sea.
Use the Underwater Movie mode to record movies underwater.
Recording Movies 1p.141
Four-way controller
4 button
Shutter release
button
WG20_OPM_ENG.book Page 139 Wednesday, February 5, 2014 2:20 PM
To Next Page
Loading...
