Ricoh WG-20 - Displaying the Clock Mode

240
7
Settings
You can use the camera as a clock. With the camera turned off, press
and hold down the 4 button to display the clock on the display.
1 Press and hold down
the 4 button.
The camera turns on and
the clock appears on the screen.
The camera turns off automatically
after approximately 10 seconds.
Pressing the power switch turns
the camera off immediately.
Displaying the Clock Mode
4 button
WG20_OPM_ENG.book Page 240 Wednesday, February 5, 2014 2:20 PM