Ricoh WG-20 - Adding a Frame (Frame Composite)

192
5
Editing and Printing Images
This function lets you add a decorative frame stored in the camera. You
can copy the optional frames from the CD-ROM supplied with the camera.
1 Enter the Q mode and use the four-way controller (45)
to choose the image to which you want to add a frame.
2 Press the four-way controller (3).
The Playback Mode Palette appears.
3 Use the four-way controller
(2345) to select N
(Frame Composite).
4 Press the 4 button.
The 12-frame display of the frame selection screen appears.
5 Use the four-way controller
(2345) to choose a frame.
Adding a Frame (Frame Composite)
The frame composite function cannot be used on the following images.
• Movies or images taken at F (Digital Panorama) or (Report)
modes
• Images that have recorded pixels of l, or m
An error message appears in step 4.
1/2
OK
OK
MENU
Cancel
Frame Composite
For composing an image
with a frame. Select Over-
write or Save as to save
OK
OK
OK
OK
OK
OK
WG20_OPM_ENG.book Page 192 Wednesday, February 5, 2014 2:20 PM