Ricoh WG-20 - Red-Eye Compensation

191
5
Editing and Printing Images
You can correct images where the flash has caused the subject
to appear with red eyes.
1 Enter the Q mode and use the four-way controller (45)
to choose the image you want to correct.
2 Press the four-way controller (3).
The Playback Mode Palette appears.
3 Use the four-way controller
(2345) to select Z
(Red-eye Compensation).
4 Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved
as a new image and the following confirmation does not appear.
5 Use the four-way controller
(23) to select [Overwrite]
or [Save as].
6 Press the 4 button.
The edited image is saved.
Red-eye Compensation
• The red-eye compensation function cannot be used on panoramic
images, movies or on images where red eyes cannot be detected
on the camera. An error message appears in step 4.
• The red-eye compensation function can only be used with still pictures
taken with this camera.
1/2
Red-eye Compensation
For compensating red-eye.
May not work due to the
condition of the image
OK
OK
MENU
Cancel
Overwrite
Save as
Cancel
OK
OK
OK
OK
OK
OK
Overwrite
Overwrite
original image?
original image?
Overwrite
original image?
WG20_OPM_ENG.book Page 191 Wednesday, February 5, 2014 2:20 PM