254
8
Connecting to a Computer
5
Click [Import].
When a message appears after
transfer is complete, click [Done].
The images are transferred to the
computer and the Media Browser
screen appears.
1
Drag [NO_NAME] on the desktop to the trash.
If the SD Memory Card has a volume label, drag the icon of that name
to the trash.
2
Disconnect the USB cable from your Macintosh and
the camera.
• If the images from the camera are not displayed in the Import screen,
select [NO NAME] (or the volume label name) in [Get Media from].
• You can find more information on how to use MediaImpression by
using the help pages. Select [ArcSoft MediaImpression Help] in [Help]
on the menu bar.
• You cannot upload images to some SNS websites by using the
software "MediaImpression 2.2 LE", which is included in the package.
Disconnecting the Camera from Your Macintosh
• If the camera (removable disk) is being used by an application such
as “MediaImpression 2.2 LE”, the camera cannot be disconnected
until the application is closed.
• The camera will automatically switch to the playback mode when
the USB cable is disconnected from your Macintosh or the camera.
WG20_OPM_ENG.book Page 254 Wednesday, February 5, 2014 2:20 PM
To Next Page
Loading...
