Ricoh WG-20 - Transferring Images Using an Eye-Fi Card

255
8
Connecting to a Computer
Transferring Images Using an Eye-Fi Card
You can automatically transfer images or movies to a computer or similar
devices via wireless LAN using a memory card that is equipped with
the wireless LAN (Eye-Fi card) function.
1 Specify the wireless LAN access point and transfer
destination on the Eye-Fi card.
For details on how to set up the card, refer to the operating manual
supplied with the Eye-Fi card.
2 Turn the camera off.
3 Insert an Eye-Fi card that has been set up.
4 Turn the camera on.
5 Set [Eye-Fi] in the [W Setting] menu to O (On).
The images are transferred automatically. For details on how to set up
the camera, refer to “Setting the Eye-Fi Communication” (p.231).
The following icons appear on the display.
During Eye-Fi communication. The camera is
communicating or searching for the access point when
[Eye-Fi] is set to O (on).
Eye-Fi communication waiting. The camera is not
communicating when [Eye-Fi] is set to O (on).
Eye-Fi communication prohibited. When [Eye-Fi] is set
to P (off).
Eye-Fi version error. The version of the Eye-Fi card is out
of date or the card is write-protected.
• Not available for Endless Memory mode.
• Run the latest firmware on your Eye-Fi card.
WG20_OPM_ENG.book Page 255 Wednesday, February 5, 2014 2:20 PM