214
7
Settings
Camera Settings
Formatting deletes all the data on the SD Memory Card or the built-in
memory.
Be sure to use this camera to format (initialize) an SD Memory Card that
is unused or has been used on other cameras or digital devices.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Format].
3
Press the four-way controller (5).
The [Format] screen appears.
4
Use the four-way controller (2)
to select [Format].
5
Press the 4 button.
Formatting starts.
When formatting is completed, the camera returns to A mode
or Q mode.
Formatting the Memory
• Do not remove an SD Memory Card while it is being formatted.
This may damage the card and make it unusable.
• Formatting deletes protected images and any data recorded
on the card with a computer or any camera.
• SD Memory Cards formatted on a computer or device other than this
camera cannot be used. Be sure to format the card with the camera.
• To format the built-in memory, be sure to eject the SD Memory Card
beforehand. Otherwise, the SD Memory Card will be formatted.
7Settings
OK
OK
Format
All data will be deleted
Format
Cancel
WG20_OPM_ENG.book Page 214 Wednesday, February 5, 2014 2:20 PM
To Next Page
Loading...
