Ricoh WG-6 - Changing the Screen Display

1
Introduction
18
Changing the Screen Display
You can switch the information displayed on the screen by pressing e.
Shooting Mode
The information displayed on the shooting screen can be switched.
Standard information display Displays the standard information such as shooting settings and electronic
level.
Detailed information display Displays the standard information, electronic compass information, and GPS
information.
Grid guide display Displays the grid guide. Autofocus frame is displayed during range-finding.
No information display Displays the autofocus frame during range-finding.
Display off Displays the autofocus frame and Live View only when z is pressed
halfway.
Memo ---------------------------------------------------------------------------------------------------------
• The grid style can be selected in [Grid Guide Display Op.] of the D menu. (p.82)
Playback Mode
You can switch the screen display among “Standard information display”,
“Detailed information display”, and “No information display” in the single
image display.
Use ab to switch the page in “Detailed information display”.
99998 99999
5184x3888
/
100-0630
1/2400 F5.5 EV+0.7 6400
1/2400 F5.5 EV+0.7 6400
00:00´23˝
35.0mm
10
99998 99999
XXXXXXXXXXX
/
100-0630
42m
N 35°
E138°
123° ESE
10:10:01
10:0010:00 02/02/201902/02/2019
02/02/2019
b
a
Memo ---------------------------------------------------------------------------------------------------------
• The displayed information differs between still images and movies.