Ricoh WG-6 - Playback Functions

3
62
Taking Pictures
Setting the Sharpness, Saturation, Tone, and Contrast
The following settings can be made in the A menu.
Sharpness [Soft], [Standard], or [Hard] can be selected.
Saturation [Soft], [Standard], or [Hard] can be selected.
[Saturation] can be set only when [Image Tone] is set to [Monochrome] in the A
menu.
Tone Adjustment [Blue], [Black & White], or [Sepia] can be selected.
[Tone Adjustment] can be set only when [Image Tone] is set to [Monochrome] in
the A menu.
Contrast [Soft], [Standard], or [Hard] can be selected.
Imprinting the Date on Still Images
The date can be imprinted at the bottom right of the image based on the
date set in the camera. The date imprinting can be set in [Date Imprint] of
the A menu.
Caution -------------------------------------------------------------------------------------------------------
• The imprinted date cannot be deleted.
• The date cannot be imprinted in the following cases.
• During the shooting in [Underwater Movie] or [High Speed Movie] of the T mode.
• In the B mode
• When [Drive Mode] is set to [Burst Shoot], [M-Cont], or [S-Cont]
• When [UTC Data Imprint] of [Data Imprint] is set to [On] in the D menu, [Date Imprint] is fixed to
[Off] in the A menu. (p.91)
Taking Images with Clearer Details
Images with clearer details can be taken by image processing. Set in [IQ En-
hancer] of the A menu.
Caution -------------------------------------------------------------------------------------------------------
• [IQ Enhancer] is disabled in the following case.
• When [Drive Mode] is set to [Burst Shoot], [M-Cont], [S-Cont], or [A-Bracket]