5
Changing the Settings
84
Power Saving Settings
Automatically Turning the Power Off
The camera turns off automatically if no operations are made for a certain
period of time. Set the time until the the camera is turned off in [Auto Power
Off ] of the E menu.
Memo ---------------------------------------------------------------------------------------------------------
• [Auto Power Off] is not available in the following cases.
• During shooting in the B mode or in [Interval Shooting] of the T mode
• During movie playback or slideshow
• During data processing
• While the camera is connected to a computer
• During FlashAir connection
Dimming the Display
The camera dims or turns off the display automatically if no operations are
performed during the set time. The following settings can be set in the E
menu.
Power Saving Dims the display automatically if no operations are performed during the set time
to suppress battery drain.
Select the time until the display is dimmed from [5sec.], [15sec.], [30sec.], [1min.],
and [2min.].
Monitor Auto off Delay Turns the monitor off automatically if no operations are performed during the set
time.
Select the time until the the monitor is turned off from [1min.], [5min.], and
[30min.].
If the camera is operated, the original brightness and display are restored.
To Next Page
Loading...
