5
Changing the Settings
89
3 Set [Logging Interval] and [Logging
Duration].
Logging Interval Select from [1sec.] to [60sec.].
Logging Duration Select from [1] hour to [18] hours.
4 Select [Start], and press e.
GPS logging starts.
Select [Stop] to stop the GPS logging.
When the set logging time elapses, the GPS logging stops.
Caution -------------------------------------------------------------------------------------------------------
• [GPS Log] is not available during the shooting in [Interval Shooting] or [Interval Movie] of the
T mode. This interval shooting cannot be performed during the GPS logging.
• The logging interval may fluctuate in the following cases.
• When the camera is being turned on or off
• When the information of a new satellite is being acquired
• The data may be acquired about 1 minute longer than the time set in [Logging Duration].
1
Logging Interval
Logging Duration
Start
Record log
ExitExit
10sec.
To Next Page
Loading...
