Ridder HortiJetPro - Page 33

Add the following component to the
irrigation group:
Irrigation group phase is active
(control).
Add the following component to the pH
dosing group:
pH tank.
Two pH sensors (a control sensor
and a verification sensor).
Add the following component to the EC
dosing group:
EC tanks.
Two EC sensors (a control sensor
and a verification sensor).
Add the following component to the EC
tanks:
Agitator.
For the EC dosing group, you need to
specify whether it doses fertilizers based
on EC and/or quantity.
Double-click on the EC dosing
group. The Control type screen
opens.
Select your preferred settings.
Click the OK button.
You have configured the EC dosing group.
HortiJet Pro
33