Rigol DG1022

RIGOL DG1000 Command System
Programming Guide for DG1000
2-30
Function Set the period of pulse for CH2 in seconds.
Example PULS:PER:CH2 0.01
8. PULSe:PERiod:CH2?
Syntax PULSe:PERiod:CH2? [MINimum|MAXimum]
Function Query the period of pulse output from CH2.
Return Value The qurey returns the period of pulse in scientific notation and in
seconds, such as: 1.000000e-02.
9. PULSe:WIDTh:CH2
Syntax PULSe:WIDTh:CH2 {<seconds>|MINimum|MAXimum}
Function Set the pulse width for CH2 in seconds.
Example PULS:WIDT:CH2 0.005
10. PULSe:WIDTh:CH2?
Syntax PULSe:WIDTh:CH2? [MINimum|MAXimum]
Function Query the pulse width of CH2.
Return Value The qurey returns the pulse width in scientific notation and in
seconds, such as: 5.000000e-03.
11. PULSe:DCYC:CH2
Syntax PULSe:DCYC:CH2 {<percent>|MINimum|MAXimum}
Function Set the duty cycle of pulse output from CH2.
Example PULS:DCYC:CH2 50
12. PULSe:DCYC:CH2?
Syntax PULSe:DCYC:CH2? [MINimum|MAXimum]
Function Query the duty cycle of pulse output from CH2.
Return Value The qurey returns the percent of duty cycle in scientific notation,
such as: 5.000000e+01.