Rigol DS1000CA Series - Page 31

Programming Introduction RIGOL
Programming Guide for DS1000CA Series
2-19
 :TRIGger:PULSe:WIDTh
VIDEO Trigger
 :TRIGger:VIDEO:MODE
 :TRIGger:VIDEO:POLarity
 :TRIGger:VIDEO:STANdard
 :TRIGger:VIDEO:LINE
 :TRIGger:VIDEO:SENSitivity
SLOPe Trigger
 :TRIGger:SLOPe:TIME
 :TRIGger:SLOPe:SENSitivity
 :TRIGger:SLOPe:MODE
 :TRIGger:SLOPe:WINDow
 :TRIGger:SLOPe:LEVelA
 :TRIGger:SLOPe:LEVelB
ALTernation Trigger
 :TRIGger:ALTernation:SOURce
 :TRIGger:ALTernation:TYPE
 :TRIGger:ALTernation:TimeSCALe
 :TRIGger:ALTernation:TimeOFFSet
 :TRIGger:ALTernation<mode>:LEVel
 :TRIGger:ALTernation:EDGE:SLOPe
 :TRIGger:ALTernation<mode>:MODE
 :TRIGger:ALTernation<mode>:TIME
 :TRIGger:ALTernation:VIDEO:POLarity
 :TRIGger:ALTernation:VIDEO:STANdard
 :TRIGger:ALTernation:VIDEO:LINE
 :TRIGger:ALTernation:SLOPe:WINDow
 :TRIGger:ALTernation:SLOPe:LEVelA
 :TRIGger:ALTernation:SLOPe:LEVelB
 :TRIGger:ALTernation<mode>:COUPling
 :TRIGger:ALTernation<mode>:HOLDoff
 :TRIGger:ALTernation<mode>:SENSitivity
The detailed information of each command are given as follows: