Rigol DS4024E User Manual

RIGOL Chapter 6 Operations and Measurements
6-26 DS4000E User’s Guide
°360×=
sourceA
FF
FF
Period
B
DelayA
BPhaseA
Wherein,
FF
BPhaseA
denotes phase A →B ;
FF
BDelayA
denotes delay
A
→B ;
sourceA
Period
denotes the period of source A.
7. Phs A
→B : the phase difference (expressed in degree) between the
threshold middle value of the rising edge of source A and the threshold middle
value of the falling edge of source B. The operation formula is:
°360×=
sourceA
FR
FR
Period
BDelayA
BPhaseA
Wherein,
FR
BPhaseA
denotes phase A →B ;
FR
BDelayA
denotes delay
A
→B ;
sourceA
Period
the period of source A.
8. Phs A
→B : the phase difference (expressed in degree) between the
threshold middle value of the falling edge of source A and the threshold middle
value of the rising edge of source B. The operation formula is:
°360×=
sourceA
RF
RF
Period
BDelayA
BPhaseA
Wherein,
RF
BPhaseA
denotes phase A →B ;
RF
BDelayA
denotes delay
A
→B ;
sourceA
Period
the period of source A.
Note:
 Source A and source B can be any of CH1 to CH4. You can set them via
Measure  Setting  Type  “Delay” (“Phase”). For the setting method,
refer to “Specify the measurement source”.
 The default value of the threshold middle value is 50%. You can also set it via
Measure  Setting  Type  “Threshold”. For the setting method, refer to
“To Set the Threshold”.

Rigol DS4024E Specifications

General

Brand	Rigol
Model	DS4024E
Category	Test Equipment
Language	English