RIGOL Chapter 13 System Function Setting
13-18 DS4000E User’s Guide
Method 2: Use the option license file
1) Confirm that the option license file is located in the root directory of the
USB storage device; insert the USB storage device into the oscilloscope
correctly.
2) At this point, the prompt message “License file detected, install?” is
displayed. Press License to start installing the option and the installation
progress is displayed. After the option is installed, the current option
interface is displayed.
Note:
A USB storage device can only store a single option license file of the same
instrument; but can store the option license files of multiple different
instruments.
During the option installation process, do not power off the instrument or
pull out the USB storage device.
To Next Page
Loading...
