Rigol MSO7000 Series User Programming Manual

RIGOL Chapter 2 Command System
2-120 MSO7000/DS7000 Programming Guide
:Quick Commands
The :Quick commands are used to set and query the relevant parameters for shortcut keys.
Command List:
 :Quick:OPERation
:Quick:OPERation
Syntax
:Quick:OPERation <type>
:Quick:OPERation?
Description
Sets or queries the type of the shortcut keys.
Parameter
Name
Type
Range
Default
<type>
Discrete
{SIMage|SWAVe|SSETup|AMEasure|SRESet}
SIMage
Remarks
SIMage: indicates the screen image.
SWAVe: indicates the waveform saving.
SSETup: indicates the setup saving.
AMEasure: indicates all measurement.
SRESet: indicates statistics reset.
Return
Format
The query returns SIM, SWAV, SSET, AME, or SRES.
Example
:Quick:OPERation SWAVe /*Sets the type of the shortcut key to SWAVe.*/
:Quick:OPERation? /*The query returns SWAV.*/

Rigol MSO7000 Series Specifications

General

Memory Depth	Up to 500 Mpts
Operating Temperature	0 °C to +50 °C
Channels	4 analog + 16 digital
Display	10.1 inch capacitive touchscreen
Waveform Capture Rate	Up to 600, 000 wfms/s
Vertical Resolution	8 bits
Maximum Input Voltage	400 V (DC + AC peak)
Trigger Types	Edge, Pulse, Slope, Video, Pattern, Duration, Timeout, Window, Runt, Setup/Hold, Delay, Nth Edge
Protocol Decoding	RS232/UART, I2C, SPI, CAN, LIN, FlexRay, I2S, MIL-STD-1553, ARINC429
Interfaces	USB, LAN, HDMI