Rigol MSO7000 Series

Chapter 2 Command System RIGOL
MSO7000/DS7000 Programming Guide 2-51
:CURSor:MANual
Command List:
 :CURSor:MANual:TYPE
 :CURSor:MANual:SOURce
 :CURSor:MANual:TUNit
 :CURSor:MANual:VUNit
 :CURSor:MANual:CAX
 :CURSor:MANual:CBX
 :CURSor:MANual:CAY
 :CURSor:MANual:CBY
 :CURSor:MANual:AXValue?
 :CURSor:MANual:AYValue?
 :CURSor:MANual:BXValue?
 :CURSor:TRACk:BYValue?
 :CURSor:MANual:XDELta?
 :CURSor:MANual:IXDELta?
 :CURSor:MANual:YDELta?
:CURSor:MANual:TYPE
Syntax
:CURSor:MANual:TYPE <type>
:CURSor:MANual:TYPE?
Description
Sets or queries the cursor type in the manual mode of cursor measurement.
Parameter
Name
Type
Range
Default
<type>
Discrete
{TIME|AMPLitude}
TIME
Remarks
 TIME: indicates X cursor, which is often used to measure the time parameters.
 AMPLitude: indicates Y cursor, which is often used to measure the voltage
parameters.
Return
Format
The query returns TIME or AMPL.
Example
:CURSor:MANual:TYPE AMPLitude /*Sets the cursor type to AMPLitude.*/
:CURSor:MANual:TYPE? /*The query returns AMPL.*/