Rigol MSO7000 Series

RIGOL Chapter 2 Command System
2-38 MSO7000/DS7000 Programming Guide
:BUS<n>:M1553 (Option)
The :BUS<n>:M1553 commands are used to set relevant parameters for the M1553 decoding.
Command List:
 :BUS<n>:M1553:SOURce
:BUS<n>:M1553:SOURce
Syntax
:BUS<n>:M1553:SOURce <source>
:BUS<n>:M1553:SOURce?
Description
Sets or queries the source of the M1553 decoding.
Parameter
Name
Type
Range
Default
<n>
Discrete
{1|2|3|4}
——
<source>
Discrete
{CHANnel1|CHANnel2|CHANnel3|CHANnel4}
CHANnel1
Return
Format
The query returns CHAN1, CHAN2, CHAN3, or CHAN4.
Example
:BUS1:M1553:SOURce CHANnel2 /* Sets the source of the M1553 decoding to D0.*/
:BUS1:M1553:SOURce? /*The query returns CHAN2.*/