Rigol MSO7000 Series User Programming Manual

RIGOL Chapter 2 Command System
2-70 MSO7000/DS7000 Programming Guide
:DVM:MODE
Syntax
:DVM:MODE <mode>
:DVM:MODE?
Description
Sets or queries the mode of the digital voltmeter.
Parameter
Name
Type
Range
Default
<mode>
Discrete
{ACRMs|DC|DCRMs}
ACRMs
Description
 ACRMs: displays the root-mean-square value of the acquired data, with the DC
component removed.
 DC: displays the average value of the acquired data.
 DCRMs: displays the root-mean-square value of the acquired data.
Return
Format
The query returns ACRM, DC, or DCRM.
Example
:DVM:MODE DC /*Sets the mode of the digital voltmeter to DC.*/
:DVM:MODE? /*The query returns DC.*/

Rigol MSO7000 Series Specifications

General

Memory Depth	Up to 500 Mpts
Operating Temperature	0 °C to +50 °C
Channels	4 analog + 16 digital
Display	10.1 inch capacitive touchscreen
Waveform Capture Rate	Up to 600, 000 wfms/s
Vertical Resolution	8 bits
Maximum Input Voltage	400 V (DC + AC peak)
Trigger Types	Edge, Pulse, Slope, Video, Pattern, Duration, Timeout, Window, Runt, Setup/Hold, Delay, Nth Edge
Protocol Decoding	RS232/UART, I2C, SPI, CAN, LIN, FlexRay, I2S, MIL-STD-1553, ARINC429
Interfaces	USB, LAN, HDMI