Rigol MSO7000 Series User Programming Manual

Chapter 3 Programming Examples RIGOL
MSO7000/DS7000 Programming Guide 3-9
Used to obtain the waveform data length bytes.
Used to delete the terminator at the end of the waveform data.
Used to transfer waveform data strings to the byte group.
7. The complete program block diagram is as shown in the figure below.
8. Select the device resource from the VISA Resource Name list box and run the program.

Rigol MSO7000 Series Specifications

General

Brand	Rigol
Model	MSO7000 Series
Category	Test Equipment
Language	English