Rigol MSO7000 Series User Programming Manual

RIGOL Chapter 2 Command System
2-28 MSO7000/DS7000 Programming Guide
:BUS<n>:SPI:SS:POLarity
Syntax
:BUS<n>:SPI:SS:POLarity <polarity>
:BUS<n>:SPI:SS:POLarity?
Description
Sets or queries the polarity of CS line of SPI decoding.
Parameter
Name
Type
Range
Default
<n>
Discrete
{1|2|3|4}
——
<polarity>
Discrete
{HIGH|LOW}
LOW
Remarks
 HIGH: indicates that the oscilloscope samples data of the source channel of data
line on the specified edge of the clock signal when the CS signal is high level.
 LOW: indicates that the oscilloscope samples data of the source channel of data
line on the specified edge of the clock signal when the CS signal is low level.
Return
Format
The query returns HIGH or LOW.
Example
:BUS1:SPI:SS:POLarity HIGH /*Sets the polarity of CS line of SPI decoding to HIGH.*/
:BUS1:SPI:SS:POLarity? /*The query returns HIGH.*/

Rigol MSO7000 Series Specifications

General

Memory Depth	Up to 500 Mpts
Operating Temperature	0 °C to +50 °C
Channels	4 analog + 16 digital
Display	10.1 inch capacitive touchscreen
Waveform Capture Rate	Up to 600, 000 wfms/s
Vertical Resolution	8 bits
Maximum Input Voltage	400 V (DC + AC peak)
Trigger Types	Edge, Pulse, Slope, Video, Pattern, Duration, Timeout, Window, Runt, Setup/Hold, Delay, Nth Edge
Protocol Decoding	RS232/UART, I2C, SPI, CAN, LIN, FlexRay, I2S, MIL-STD-1553, ARINC429
Interfaces	USB, LAN, HDMI