104
Memory Card
Data size
The necessary data size for Auto 1 store
For example, when wishing to carry out the measurement with 100 msec
sampling for 24 hours, the necessary data size is 11.5 MBytes from the
above table. The necessary compact flash card size is 11.5 MBytes and
more for this measurement.
When carrying out Auto 2 store, 120-Byte capacity per one data sets is
necessary.
For example, when carrying out 10-minute measurement for 1 week
continuously, 1008 data sets are stored. Therefore 1008×120 = approx.
121-kByte capacity is necessary.
When carrying out Manual store, approx. 25-kByte capacity for one file (max.
100 data sets) is necessary. In this case, the necessary capacity is determined
by the file, not by the number of data sets. Therefore storing 1 data set and
storing 100 data sets need the same capacity.
To Next Page
Loading...
