Risco Agility Software Manual

AgilityConfigurationSoftwareManual  
Page 43
3. Clickonthe button.ThisoperationwillsetthemainunittoLearn
mode.Thefollowingmessageappears:

4. Sendatransmissionfromthedevice.(Seetablebelow)

How to send a write message (transmission):
Wireless Device Sending Write Message
Detector/Contacts
Pressthetamperswitchfor3seconds
2‐WayKeypad
Pressbothkeys
and
simultaneouslyforatleast2
seconds
1‐WayKeypad
Pressthe
keytwice
1‐WayKeyfob
Pressthe±buttonforatleast2seconds
2‐WayRemoteControl
Pressbothkeys and 
simultaneouslyforatleast2seconds
SmokeDetector
Insertbattery.Writemessageissend
automaticallywithin10seconds.
Sounder
Presstheresetswitchonthesounder,
wait2secondsandthenclosethe
tamperswitch
Gas,COdetectors
Pressthetestbuttonfor3seconds
2PanicButtonKeyfob
Pressbothbuttonsforatleast7seconds

5. Themainunitwillacknowledgethetransmissionwithasound.Whenthesystem
recognizesthedevicetheRadioDeviceAllocationscreenindicatesthatthestatus
ofallocationhasbeensuccessful.


Risco Agility Specifications

General

Remote Management	Yes
Mobile App	Yes
Voice Module	Optional
Backup Battery	Yes
Two-Way Voice	Yes
Event Reporting	Yes
Remote Control	Yes
Siren Output	Yes
Type	Wireless
Communication	GSM
Compatibility	Risco accessories
Power Supply	Mains powered with battery backup