Risco Agility Software Manual

 AgilityConfigurationSoftwareManual
Page 48
Chapter 11 - Testing
TheTestingscreendisplaystheRSSIsignalintensitylevels,batterycharginglevelsand
versionsoftheAgilityandaccessories.YoucanperformadiagnostictestfortheRSSIlevel
onthefollowing:MainUnit,Zones,RemoteControls(Keyfobs),Keypads,Sounders,GSM,
I/OModuleandIPModule.
• Toperforma
diagnostictest,firstlyestablishcommunicationbetweenthemainunit
andtheConfigurationsoftwarebyselectingCommunication>Connectfromthemain
menuandthenclickonthe button.
• Toperformadiagnostictestsequentiallyforthemainunitandalltheaccessories,click
the .Atestforthemainunitandeachaccessorywillruninsequence.
Note:TheRSSIlevelwillappearfrom0–100%intheNoise/Communicationlevelbar.

Figure35:TestingScreen



Risco Agility Specifications

General

Remote Management	Yes
Mobile App	Yes
Voice Module	Optional
Backup Battery	Yes
Two-Way Voice	Yes
Event Reporting	Yes
Remote Control	Yes
Siren Output	Yes
Type	Wireless
Communication	GSM
Compatibility	Risco accessories
Power Supply	Mains powered with battery backup