Rish Master 3430 User Manual

range will be restricted, the value will wrap.
Example: If primary value of PT is set as
692.8kV L-L (max value) then primary value
Pressing the “ Up” key will advance to the next
less significant digit. (* Denotes that decimal
point will be flashing).
Primary Value results in a maximum power of
greater than 666.6 MVA in which case the digit
when the “ Up” key is pressed.
The “Maximum Power” restriction of 666.6 MVA refers to 120% of nominal current and 120%
of nominal voltage, i.e, 462.96 MVA nominal power per phase.
When the least significant digit had been set, pressing the “ Up” key will advance to the
“Current Transformer Primary Value Confirmation” stage.
The minimum value allowed is 1, the value will be forced to 1 if the display contains zero
of Current is restricted to 1157A.
Current Transformer Primary Value Confirmation.
This screen will only appear following an edit of the
.
If the scaling is not correct, Pressing the “ Down”
key will return to the “ Current Transformer Primary
Value”Edit stage with the most significant digit
highlighted (associated decimal point flashing)
and the bottom line of the display will be blanked.
Pressing the “ Up” key sets the displayed value and
will advance to the “Current Transformer Secondary
Value Edit” menu. (See Section 3.2.5)
Current Transformer Primary Value.
VRY
KVAr
Sys
V
KW
VBR
Angle
Max
x1000
KVArh
x1000
IN
Ph R
P.F.
KWh
Ph B
A
VYB
KVA
Min
x1000
Hz
KVAh
Ph Y
%THD
x1000
Hz
KVAh
Ph Y
%THD
VRY
KVAr
Sys
V
KW
VBR
Angle
Max
x1000
KVArh
x1000
IN
Ph R
P.F.
KWh
Ph B
A
VYB
KVA
Min
x1000
Hz
KVAh
Ph Y
%THD
x1000
Hz
KVAh
Ph Y
%THD
18

Rish Master 3430 Specifications

General

Brand	Rish
Model	Master 3430
Category	Measuring Instruments
Language	English