Rish Master 3430 - 3.17 Analog Output 1 Selection

31
VRY
KVAr
Sys
V
KW
VBR
Angle
Max
x1000
KVArh
x1000
IN
Ph R
P.F.
KWh
Ph B
Pressing the “ Down” key will re-enter the
“ Analog output 1 Edit”
Analog output 1 Confirmation :
Pressing the “ Up” key sets the displayed value
and will advance to the Analog output 2 selection
( see section 3.2.17 )
VRY
KVAr
Sys
V
KW
VBR
Angle
Max
x1000
KVArh
x1000
IN
Ph R
P.F.
KWh
Ph B
3.2.16 Analog Output 1 Selection : ( Optional )
This screen is for analog output 1 only . It allows the user to set analog output 1 to corresponding
measured parameter . Refer table “ Parameter for Analog output “.
Pressing “ Up” key accepts the present value and
advance to the Analog output 2 selection (see section
3.2.17).
Pressing the “ Down” key will enter the
“ Analog output 1 Edit” mode and scroll the values,
as per Table “ Parameter for Analog output”
Pressing the “ Up” key advance to the Analog
output 1 confirmation screen .
A
VYB
KVA
Min
x1000
Hz
KVAh
Ph Y
%THD
x1000
Hz
KVAh
Ph Y
%THD
A
VYB
KVA
Min
x1000
Hz
KVAh
Ph Y
%THD
x1000
Hz
KVAh
Ph Y
%THD