Rishabh RISH CON - I - Current Transformer Secondary Value

Primary value.
Pressing the “ Up” key will confirm New CT Primary value
& advance to the CT secondary setting (section 3.1.2.2).
This screen allows the user to set
the CT Secondary value.
Pressing the “ Down” key will
enter the “New/Change CT
Secondary value edit” mode .
Pressing the “ Up” key will
confirm the present value as CT
Secondary and advance to the
Communication parameter Setting (section 3.1.3).
New / Change CT Secondary value
( * Denotes that digit will be
flashing ).
Pressing the “ Down” key will
scrollthe value of the fourth digit
from 1 through to 5, the value will
wrap from 5 round to 1.
Pressing the “ Up” key will
advance the operation to the “New
/ Changed CT Secondary value
confirmation” and sets the fourth
digit, in this case to “5”.
New/changed CT Secondary
value confirmed.
Pressing the “ Down” key will
return to the “New / Change CT
3.1.2.2 Current Transformer secondary value
12