Rishabh RISH CON - I - RS 485 Parity Selection

value through 2.4,4.8,9.6,19.2 and
back to 2.4(values are flashing).
Pressing “ Up” key will confirm the
present value as Baud rate and
advance to the Parity Selection
(section 3.1.3.3).
RS 485 Baud Rate confirmation
Pressing “ Down” key will be re-
enter into the. “Baud Rate Edit”
mode.
Pressing the “ Up” key will confirm
the Baud rate value and advance to
the Parity Selection (section
3.1.3.3).
3.1.3.3 RS 485 Parity Selection
This screen allows the user to set
Parity & number of stop bits of RS
485 port.
Pressing the “ Down” key will
enter the “Parity & stop bit edit”
mode and scroll the value through
E : even parity with one stop bit
odd : odd parity with one stop bit
no. 1S : no parity with one stop bit
no. 2S : no parity with two stop bit
Pressing “ Up” key accepts the present value and advance
to the Output Type selection (section 3.1.4).
15