Rishabh RISH CON - I - Start Value of Input

(*Denotes that digit will be flashing).
Pressing the “ Down” key will scroll the value of the fourth
digit from 0 through to 9, the value will wrap from 9 round to 0.
Pressing the “ Up” key will advance to confirmation
screen & set the fourth digit, in this case to “0”.
New/changed End value of
Input confirmed.
Pressing the “ Down” key will
re- enter to the “New / Change
End value of Input edit” mode.
Pressing the “ Up” key will
confirm New End value of Input
and advance to the Start value of
Input setting (section 3.1.5.2).
3.1.5.2 Start value of Input
This screen allows the user to set
the Start value of Input.
Start value of input can be set up
to 80 % of end value of input.
Pressing the “ Down” key will
enter New/Change Start value of
Input edit” mode.
Pressing “ Up” key will confirm
the present value as Start value of Input and advance to the
Elbow function selection (section 3.1.5.3)
New / Change Start value of Input
(*Denotes that digit will be flashing).
Pressing the “ Down” key will scroll the value of the second
digit from 0 through to 4, the value will wrap from 4 round to 0
A
19
A