Rishabh RISH CON - I - New; Change Elbow Value of the Output 2

Pressing the “ Down” key will enter the “New/Change
Elbow value of the Output 2 edit” mode.
Pressing “ Up” key will confirm the present value as Elbow
value of the Output 2 and exit setup menu.
New / Change Elbow value of the Output 2
(*Denotes that digit will be flashing).
Pressing the “ Down” key will
scroll the value of the first digit
from 0 through to 1, the value will
wrap from 1 round to 0.
Pressing the “ Up” key will
advance the operation to the next
digit and set the first digit, in this
case to “0”.
Enter New / Change Elbow value
of the Output 2, first digit entered,
prompting for second digit.
(*Denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the second
digit from 0 through to 9, the
value will wrap from 9 round to 0 depending the set End
value of Output2.
Pressing the “ Up” key will
advance the operation to the next
digit and set the second digit, in
this case to “5”.
Enter New / Change Elbow value
of the Output 2, second digit
*
*
*
32