Rishabh RISH CON - I - Editing Existing Password

*
Password Incorrect.
This screen is displayed when the
unit has not accepted the
Password entered.
Pressing the " Down" key will
re-enter to the “Enter Password”
entry stage.
Pressing the “ Up” key will exit
the setup menu.
3.1.1.2 Editing Existing Password
New / Change Password
(*Denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the first digit
from 0 through to 9, the value will
wrap from 9 round to 0.
Pressing the “ Up” key will
advance the operation to the next digit and set the first digit,
in this case to “4”.
Enter New Password, first digit
entered, prompting for second
digit. (*Denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the second
digit from 0 through t o 9 , t h e
value will wrap from 9 round to 0.
Pressing the “ Up” key will advance the operation to the
next digit and set the second digit, in this case to “1”.
8