Rishabh RISH CON - I - 3.1.1 Password Protection

3.1.1. Password Protection
3.1.1.1 Password verification
Password protection can be enabled to prevent
unauthorised access to set-up screens, by default password
protection is not enabled.
Password protection is enabled by selecting a four digit
number other than 0000, setting a password of 0000
disables the password protection.
Enter Password, prompt for first
digit. (*Denotes that digit will be
flashing).Pressing the “ Down”
key will scroll the value of the first
digit from 0 through t o 9 , t h e
value will wrap from 9 round to 0.
Pressing the “ Up” key will
advance the operation to the next
digit and set the first digit.
In the special case where the Password is “0000”pressing
the “ Up” key when advance to password set or confirm
screen.
Enter Password, first digit
entered, prompt for second digit.
(*Denotes that digit will be
flashing).
Pressing the “ Down key will
scroll the value of the second digit
from 0 through to 9, the value will
wrap from 9 round to 0.
Pressing the “ Up” key will advance the operation to the
next digit and set the second digit. In this case to “2”.
A
6