Rishabh RISH CON - I - New; Change Start Value of the Output 2

*
New / Change Start value of the Output 2
(*Denotes that digit will be
flashing).Pressing the “
Down” key will not affect the
value of first digit, it is always 0.
Pressing the “ Up” key will
advance the operation to the
next digit and set the first digit, in
every case to “0”.
Enter New / Change Start value
of the Output 2, first digit entered,
prompting for second digit.
(*Denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the second
digit from 0 through to 2 the
value will wrap from 2 round to 0.
Pressing the “ Up” key will advance the operation to the
next digit and set the second digit, in this case to “1”.
Enter New / Change Start value
of the Output 2, second digit
entered, prompting for third digit.
(*Denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the third digit
from 0 through 9, the value will
wrap from 9 round to 0.
Pressing the “ Up” key will advance the operation to the
next digit and set the third digit, in this case to “5”.
30
*
*