entered, prompting for third digit. (*Denotes that digit will be
flashing).
Pressing the “ Down” key will scroll the value of the third
digit from 0 through to 9, the value will wrap from 9 round to 0
depending the set End value of Output.
Pressing the “ Up” key will advance the operation to the
next digit and set the third digit, in this case to “0”.
Enter New / Change Elbow value
of theOutput 2, third digit entered,
prompting for fourth digit.
(*denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the fourth digit
from 0 through to 9, the value will
wrap from 9 round to 0 depending the set End value of
Output.
Pressing the “ Up” key will advance the operation to the
“New / Changed Elbow value of the Output 2 confirmation”
and set the fourth digit, in this case to “0”.
New/changed Elbow value of the Output 2
confirmed.
Pressing the “ Down” key will
re- enter to the “New / Change Elbow
value of the Output 2”.
Pressing the “ Up” key will
confirm New Elbow value of the
Output 2 and exit setup menu.
33
*
To Next Page
Loading...