New / Change Start value of the
Output 1
(*Denotes that digit will be
flashing).
Pressing the “ Down” key will
not affect the first digit It always
remains 0.
Pressing the “ Up” key will
advance the operation to the next digit and set the first digit
in every case to ‘0’.
Enter New / Change Start value of the Output 1, first digit
entered, prompting for second digit. (*Denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the second digit
from 0 through to 4, the value will
wrap from 4 round to 0 depending
on the set End value of Output.
Pressing the “ Up” key will
advance the operation to the next
digit and set the second digit, in
this case to “0”.
Enter New / Change Start value of
the Output 1, second digit entered,
prompting for third digit. (*Denotes
that digit will be flashing).
Pressing the “ Down” key will
scroll the value of the third digit
from 0 through to 9, the value will
wrap from 9 round to 0 depending
A
*
A
*
A
*
25
To Next Page