Enter New / Change Elbow value
of the Output 1, second digit
entered, prompting for third digit.
(*Denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the third digit
from 0 through to 9, the value
willwrap from 9 round to 0 depending on the set End value of
Output.
Pressing the “ Up” key will advance the operation to the
next digit and set the third digit, in this case to “0”.
Enter New / Change Elbow value
of the Output 1, third digit entered,
prompting for fourth digit. (*
denotes that digit will be flashing).
Pressing the “ Down” key will
scroll the value of the fourth digit
from 0 through to 9, the value will
wrap from 9 round to 0 depending
on the set End value of Output.
Pressing the “ Up” key will advance the operation to the
“New / Changed Elbow value of the Output 1 confirmation”
and set the fourth digit, in this case to “0”.
New/changed Elbow value of
the Output 1 confirmed.
Pressing the “ Down” key will re-
enter to the “New / Change Elbow
value of the Output 1”.
28
A
*
A
*
A
To Next Page
Loading...