Rishabh RISH CON - I - Page 4

3.1.6 Output characteristics Setting
3.1.6.1 Output 1 characteristics Setting
3.1.6.1.1 End value of output 1
3.1.6.1.2 Start value of output 1
3.1.6.1.3 Elbow value of output 1
3.1.6.2 Output 2 characteristics Setting
3.1.6.2.1 End value of output 2
3.1.6.2.2 Start value of output 2
3.1.6.2.3 Elbow value of output 2
3.2 Programming Via programming port available at
front of Transducer using optional PRKAB600
Adapter.
Installation
5.1 EMC Installation Requirements
5.2 Case Dimensions
5.3 Wiring
5.4 Auxiliary Supply
5.5 Fusing
5.6 Earth / Ground Connections
5.7 Maintenance
6. Specifications
7. Connection Diagrams
3.3
DIP Switch setting for output
4.
Programming Via optional RS485(MODBUS)
communication port.
3.3.1
RS 485 ( ModBus )
4.1 Accessing 3X Resistors
4.2 Accessing 4X Resistors
5.
2