RKI Instruments GX-3R User Manual

40 • Chapter 4: Display Mode GX-3R Operator’s Manual
Last Successful Bump Test Date (BUMP DATA)
The BUMP DATA screen shows the date of each installed sensor’s last successful bump test.
This screen only appears if BUMP.RMDR is set to ON.
1 . After entering Display Mode, press and release POWER MODE until BUMP DATA
appears.
2 . Press AIR to enter the BUMP DATA screen and to scroll through the installed sensors.
3 . When you are done viewing the last bump test date for the sensors, press and release
POWER MODE to return to the BUMP DATA screen in Display Mode.
Date, Time, Temperature Screen (TEMP)
The TEMP screen shows the instrument’s date and time and the surrounding area’s
temperature.
BUMP DATA
7:49
dISP
BUMP DATA
7:49
CH4
18- 12. 20
BUMP DATA
7:49
O2
18- 12. 20
BUMP DATA
7:49
H2S
18- 12. 20
BUMP DATA
7:49
CO
18- 12. 20
AIR AIR
AIR
AIR
22 ° C
7:49
7:49
18- 12. 26

RKI Instruments GX-3R Specifications

General

Brand	RKI Instruments
Model	GX-3R
Category	Measuring Instruments
Language	English