RKI Instruments GX-3R - Viewing Alarm Settings Screen (ALARM-PT)

GX-3R Operator’s Manual Chapter 4: Display Mode • 41
Alarm Points Screen (ALARM--PT)
The Alarm Points Screen shows the gas alarm settings for all active channels.
1 . After entering Display Mode, press and release POWER MODE until ALARM--PT
appears.
2 . Press and release AIR. The Full Scale Settings screen appears and shows full scale
settings for each channel.
3 . Use AIR to scroll through the Warning, Alarm, Alarm H, STEL, and TWA settings.
4 . Press and release POWER MODE to return to the Alarm Points Screen.
ALARM--PT
7:49
dISP
F. S .
7:49
2000 200.0
CO ppm H2S ppm
100 40.0
CH4 %LEL O2 %
WARNING
7:49
25 5.0
CO ppm H2S ppm
10 19.5
CH4 %LEL O2 %
ALARM
7:49
50 30.0
CO ppm H2S ppm
25 18.0
CH4 %LEL O2 %
ALARM H
7:49
1200 100.0
CO ppm H2S ppm
50 23.5
CH4 %LEL O2 %
STEL
7:49
200 5.0
CO ppm H2S ppm
TWA
7:49
25 1.0
CO ppm H2S ppm
AIR
AIR
AIR
AIR
AIR
AIR