76 • Chapter 5: User Mode and Calibration GX-3R Operator’s Manual
Setting the Date/Time (DATE)
1 . From the main menu, place the cursor next to DATE.
2 . Press and release POWER MODE. The date and time display with the year flashing.
3 . Use AIR to display the desired year.
4 . Press and release POWER MODE to save the setting. The month setting flashes.
5 . Repeat Step 3 and Step 4 to enter the month, day, hours, and minutes settings. The date
and time are saved and the instrument returns to the DATE menu item.
6 . See “Entering Measuring Mode (START)” on page 78 to enter Measuring Mode.
Turning the Password On/Off (PASSWORD)
ON: The GX-3R prompts you for a password when you enter User Mode. The factory-set
password is 0405 but it can be changed as desired.
OFF (factory setting): No password is required to enter User Mode.
1 . While in User Mode, press AIR to scroll to PASSWORD.
2 . Press and release POWER MODE. The current setting flashes.
3 . Use AIR to display the desired setting.
4 . If you selected OFF, press and release POWER MODE to save the setting and return to
the PASSWORD item in User Mode.
If you selected ON, continue with Step 5.
To Next Page
Loading...
