Introduction
3
Plugs and Sockets
The mains cable provided with your computer comes with a sealed
moulded plug so no wiring is required.
Always use the mains cable plug provided, inserted into a standard
3-pin power socket only. Sockets should be earthed through the
wiring system of the building and must be easily accessible.
Cables
Check the condition of all cables - and particularly mains cables -
regularly. If any are damaged, replace them immediately.
Place the computer near to the socket to avoid trailing cables.
If you use an extension lead, make sure it is three-core and safely
earthed. Incorrect wiring can be fatal.
Fuses
Always use a 5A fuse that conforms with BS1362 and is approved
by ASTA for your C-Series computer. Always keep the fuse cover
on.
WARNING:
Never replace a blown fuse with one of a higher rating than the correct fuse.
Ventilation and Dust Protection
Your C-Series computer has a cooling fan outlet on the rear panel
and ventilation slots on the underside of the front panel. Always
make sure that all the ventilation outlets are not obstructed, to
prevent your computer from overheating.
To Next Page
Loading...