5: Technical Information
79
Mouse and Keyboard Connector
At the back of your C-Series computer there are two identical
standard IBM PS/2 style connectors. One is for a PS/2 style mouse
and the other is for a PS/2 style keyboard.
System Setup (CMOS) Program
The BIOS has a built in setup program which allow the user to
modify the computer's basic system parameters. This information
is stored in the battery backed CMOS memory.
Your computer has been set up by RM and is ready to use.
Use the CMOS Setup program to change the system settings if:
• you change the amount of memory in your computer
• you add or change a disk drive
• you want to change the password
• you want to set up special features.
Caution:
Do not attempt to run Setup and change the system settings unless you
understand what you are doing. You can experience serious problems when using
your computer if you select incorrect settings in Setup.
Full details on entering, changing the system settings and saving
changes and exiting are in the System Board User’s Manual (see
the white envelope labelled Technical Information).
Important:
Before changing any system settings make a record of all current settings first.
To Next Page
Loading...
