1 Introduction
MANUAL TME400-VCF · EN08 · July, 01
st
2021
1.2.
Purpose of the manual
This manual provides information that is necessary for fault-free and safe operation.
The TME400 was designed and produced according to the state of the art and gener-
ally recognized safety standards and directives. However, its use can entail dangers
that are avoidable by complying with this manual. The device must only be used as
intended and in technically sound condition.
Unintended use voids all warranty claims and the TME400 can also lose its
approvals.
1.2.1.
Abbreviations
The following abbreviations are used:
The TME400-VM is a turbine meter which is used for non-cus-
tody-transfer volume measurement (Volume Measurement) of the
operating volume of non-aggressive gases and combustion fuels
is used.
The TME400-VMF is a turbine meter that is used in custody-
transfer applications (Fiscally). The designation TME400-VMF
comprises all turbine meters.
The TME400-VC also enables calculation of the standard volume
flow (Volume Corrector) from the operating volume flow in non-
custody-transfer applications.
The TME400-VCF is used in custody-transfer applications (Fis-
cally). In addition to the turbine meter, the TME400-VCF designa-
tion also includes the volume corrector.
This manual only describes the TME400-VC and TME400-VCF.
To Next Page
Loading...
Need help?
General
